Filter
Top Products
Remote Control Panel
MacintoshBasics
Windows
Windows
42
■ Others
Power save mode
To conserve energy and operating cost, this printer is provided with a programmable
power save feature. The printer is factory set with the power save feature turned on to
comply with E
NERGY STAR
®
requirement. The printer enters the Power Save mode when
the printer is idle for 5 minutes by default.
Auto continues
With this feature turned on, the printer automatically continues the current print job in the
case of certain non-fatal errors.
Page Protection
With this feature turned on, the printer does not begin printing until the processor has
finished imaging the entire page. The page then prints correctly, although it takes slightly
longer to print.
I/O timeout setting
Automatically prints the remaining data in memory when the computer does not send
data to the printer during the set time.
Printer Emulation
Selects PCL or PostScript to print data.
• Auto: PCL or PostScript is Automatically selected depending on the print data.
• PCL: PCL is selected for printing.
NOTE
• If the PostScript emulation is not used, select PCL for the Printer Emulation. It will
become difficult that the memory overflow error occurs.
Language
Selects the language when printing the configuration page [see “Tool Menus (Tool Bar
Icons)” on page 32].