Filter
Top Products
Remote Control Panel
MacintoshBasics
Windows
Windows
28
The Remote Control Panel can be used for the following.
1. Used to display the option information installed in the printer (see “Information” on page 43).
2. Used to change the printer’s setting (see “Changing the Settings” on page 31).
3. Used to print the demo page, configuration page or fonts list
(see “Tool menu” on page 32).
4. Used to change the network setting (see “Network (KX-P7310 only)” on page 40).
The setting of the Remote Control Panel will be taken over by the setting of the printer driver.
NOTE
• When using the Remote Control Panel for the printer on the network, you cannot specify the
greyed setting. The printer’s setting is only displayed or not displayed (N/A).
■ Available Operating System
The Remote Control Panel is available in the following operating system.
Windows 95
*
1
, Windows 98*
2
, Windows Me*
3
, Windows NT® 4.0*
4
,
Windows 2000
*
5
or
Windows XP, Windows Server 2003
*
1
Microsoft® Windows® 95 operating system (hereafter Windows 95)
*
2
Microsoft® Windows® 98 operating system (hereafter Windows 98)
*
3
Microsoft® Windows® Millennium Edition operating system (hereafter Windows Me)
*
4
Microsoft® Windows NT® operating system Version 4.0 (hereafter Windows NT 4.0)
*
5
Microsoft® Windows® 2000 operating system (hereafter Windows 2000)
Remote Control Panel