Filter
Top Products
Upgrade Options
Settings and Printing Network
Maintenance and Spec.
Maintenance and Spec.
4
The following upgrade options can be installed in the printer.
2nd Feeder (KX-PMF3)
An additional cassette can be used by installing this option. Refer to the installation
manual included in the carton box with the option.
RAM Board: 16 MB (KX-PEM12) or 32 MB (KX-PEM13)
Installed to increase the printer’s memory. To install it, see the following instructions.
CAUTION
• To prevent static electricity damage to the printer or RAM board,
- Do not touch the connector of the printer board.
- Touch the printer’s bare metal frame often to discharge static electricity from your
body.
- Handle the circuit board only by the edges.
- Do not lay board on a metal surface.
• To prevent damage to the RAM board, avoid exposing the RAM board to direct sunlight, high
temperatures or humidity.
1 Turn the printer off, unplug the power cord and disconnect any cables
connected to the connectors on the back of the printer.
Upgrade Options
Installing the RAM Board