Filter
Top Products
1. Introduction and Installation
14
For Fax Advantage assistance, call 1-800-435-7329.
Installation (Base Unit)
1.6 Ink film
The included film roll is a starter ink film.
1.6.1 Installing the ink film
Important:
L Remove all the blue shipping tape from
the unit before installation.
1 Open the front cover by pulling up the center
part.
2 Release the back cover by pushing the green
button (1).
L You can also release the back cover by
pushing in the green lever (2).
3 Open the back cover.
4 Insert the front ink film roll by inserting its
blue gear into the left slot of the unit (1).
Insert the rear ink film roll by inserting its
white gear into the left slot of the unit (2).
L The ink film is safe to touch and will not
rub off on your hands like carbon paper.
L Make sure the blue gear (1) and white
gear (2) are installed as shown.
2
1
2
1
FPG391_en.book Page 14 Friday, July 16, 2004 5:38 PM