Filter
Top Products
9. Option
90
9OptionHandset Registration
9.1 Canceling the handset
registration
If you no longer need to use the handset or if you
want to use the handset with a different base unit
of the same model, it is necessary to cancel the
handset’s registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and the base unit are
near each other and not being used.
L Keep the front cover page open for button
locations.
9.1.1 With the handset
1 Press {MENU}.
2 Scroll to “Initial setting” by pressing
{v} or {e}, then press the soft key
({SELECT}).
3 Scroll to “Registration” by pressing {v}
or {e}, then press the soft key ({SELECT}).
4 Scroll to “Deregistration” by pressing
{v} or {e}, then press the soft key
({SELECT}).
5 Press {3}{3}{5} (DEL.) to delete the
registration memory.
6 Press the soft key ({OK}).
L A beep will sound and the registration
memory will be erased on both the
handset and the base unit.
L “[-]” is shown on the top right of the
canceled handset’s display.
9.1.2 With the base unit
1 Press and hold {LOCATOR/INTERCOM}
until “HS REGISTRATION” is displayed.
2 Press the desired extension number you
want to cancel ({1} to {4}).
3 Press {SET}.
L A beep will sound and the registration
memory will be erased on the base unit
only.
Note:
L After canceling registration, the handset
cannot be used. If you want to use it again,
re-register the handset to the base unit.
9.2 Re-registering the
handset
If you want to re-register the handset to the base
unit or a different base unit of the same model,
you need to register it to that base unit. The
handset will be given a new extension number of
that base unit. Only one handset can be
registered at a time.
Make sure the base unit and the other
handsets are near each other and not being
used. Registration must be completed within
1 minute.
L If you have canceled the handset registration
at the previous base unit (page 90), start from
step 5.
L Keep the front cover page open for button
locations.
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by pressing
{v} or {e}, then press the soft key
({SELECT}).
3 Scroll to “Registration” by pressing {v}
or {e}, then press the soft key ({SELECT}).
4 Press the soft key ({SELECT}) at “HS
registration”.
5 Base unit:
Press and hold {LOCATOR/INTERCOM}
until “HS REGISTRATION” is displayed.
6 Handset:
1. Press the soft key ({OK}).
2. Wait until a long beep sounds and the
display shows the registered number.
The registration will be complete.
L The registered number “[1]” to
“[4]” will be shown on the top right of
the display.
Example: Extension number 2
Note:
L To stop registration, press {OFF} on the
handset and press {LOCATOR/INTERCOM}
on the base unit.
FPG391_en.book Page 90 Friday, July 16, 2004 5:38 PM