Filter
Top Products
8. Programmable Features
85
4. Scroll to “Recording time” by pressing
{v} or {e}, then press the soft key
({SELECT}).
5. Press {v} or {e} repeatedly to select the
desired setting.
L You can also select the recording time by
pressing {1} (1 minute), {2} (2 minutes),
{3} (3 minutes) or {0} (“Greeting
only”).
6. Press the soft key ({SAVE}).
7. Press {OFF}.
Note:
L If you select “Greeting only”, the unit will
answer a call with the greeting message, and
then hang up. The unit will not record any
incoming messages.
L You can also program this feature with the
base unit (feature #10 on page 75).
Setting remote operation code
1. Press {MENU}.
2. Scroll to “Initial setting” by pressing
{v} or {e}, then press the soft key
({SELECT}).
3. Press the soft key ({SELECT}) at “Set
answering”.
4. Scroll to “Remote code” by pressing {v} or
{e}, then press the soft key ({SELECT}).
5. Enter a remote code using a 2-digit number
(00–99).
L The default setting is “11”.
6. Press the soft key ({SAVE}).
7. Press {OFF}.
Note:
L You can also program this feature with the
base unit (feature #11 on page 75).
Setting the mailbox 2 or 3 password
To prevent other users from retrieving your
messages, program a password for mailbox 2 or
3.
1. Press {MENU}.
2. Scroll to “Initial setting” by pressing
{v} or {e}, then press the soft key
({SELECT}).
3. Press the soft key ({SELECT}) at “Set
answering”.
4. Scroll to “Set mailbox2&3” by pressing
{v} or {e}, then press the soft key
({SELECT}).
5. Select the desired mailbox by pressing {e}
(“Mailbox2”) or {v} (“Mailbox3”).
L If the password has previously been
assigned to the mailbox, it is displayed.
6. Enter a 2-digit number (00–99).
L If you entered a wrong number, press the
soft key ({CLEAR}), then enter the
password again.
7. Press the soft key ({SAVE}).
8. Press {OFF}.
To check the password
Repeat steps 1 to 5.
L The password is displayed. When finished,
press {OFF}.
To erase the password
Press the soft key ({CLEAR}) in step 6, and
press the soft key ({SAVE}), then press {OFF}.
L You will be able to access the mailbox without
entering the password.
Note:
L You can also program this feature with the
base unit (feature #51 on page 78 and
feature #52 on page 78).
Changing the recording sound quality for
incoming messages
2 recording modes are available. “Standard
recording 15min” (default) provides more
recording time (15 minutes) and standard sound
quality. “Enhanced recording 7min”
provides less recording time (7 minutes) but
clearer sound quality.
1. Press {MENU}.
2. Scroll to “Initial setting” by pressing
{v} or {e}, then press the soft key
({SELECT}).
3. Press the soft key ({SELECT}) at “Set
answering”.
4. Scroll to “Recording mode” by pressing
{v} or {e}, then press the soft key
({SELECT}).
5. Press {v} or {e} repeatedly to select the
desired setting.
L You can also select the recording mode
by pressing {1} (“Standard”) or {2}
(“Enhanced”).
6. Press the soft key ({SAVE}).
7. Press {OFF}.
Setting the message alert
You can select whether or not the
Ringer/Message alert indicator on the handset
will flash when new messages have been
recorded (page 67). The default setting is OFF.
FPG391_en.book Page 85 Friday, July 16, 2004 5:38 PM