Panasonic KX-FPG391 All in One Printer User Manual


 
10. Help
94
For Fax Advantage assistance, call 1-800-435-7329.
—————————————————————
OPEN CABINET
CHECK FILM SLACK
b
OPEN CABINET
CHECK FILM TYPE
L Please use genuine Panasonic replacement
film (page 10).
L The ink film is slack. Tighten it (see step 5 on
page 15).
L The fax machine is positioned near
appliances such as TVs or speakers which
generate an intense magnetic field.
—————————————————————
PAPER JAMMED
L A recording paper jam occurred. Clear the
jammed paper (page 102).
—————————————————————
PHONE BOOK FULL
L There is no space to store new items in the
phone book. Erase unnecessary items (page
41).
L The phone book memory of the destination
handset is already full, or became full when
copying phone book items. Copying was
stopped. Press {STOP} to exit the mode
(page 42). Erase other stored items in the
destination handset phone book (page 41),
then try again.
—————————————————————
PLEASE WAIT
L The unit is checking that there is no slack or
crease on the ink film. Wait for a moment
while the check is completed.
—————————————————————
RECORDING ERROR
L The greeting message or voice memo you
recorded was under 1 second long. Record a
longer message.
—————————————————————
REDIAL TIME OUT
L The other partys fax machine is busy or has
run out of recording paper. Try again.
—————————————————————
REMOVE DOCUMENT
L The document is jammed. Remove the
jammed document (page 105).
L Press {STOP} to eject the jammed paper.
—————————————————————
SERIAL ERROR
L There is something wrong with the unit.
Contact our service personnel. The base unit
will not work. So, if you make a call, use the
handset.
—————————————————————
SYSTEM IS BUSY
L Radio communication between the handset
and the base unit is partially impaired.
L More than one unit is in use, such as
conducting an outside/intercom call. Try
again later.
L Another user is listening to messages. Try
again later.
—————————————————————
TRANSMIT ERROR
L A transmission error occurred. Try again.
L If you send a fax overseas, try the following:
Use the overseas transmission mode
(feature #23 on page 76).
Add 2 pauses at the end of the telephone
number or dial manually.
—————————————————————
UNIT OVERHEATED
L The unit is too hot. Stop using the unit for a
while and let the unit cool down.
FPG391_en.book Page 94 Friday, July 16, 2004 5:38 PM