Filter
Top Products
2. Preparation
31
For Fax Advantage assistance, call 1-800-435-7329.
Initial Programming
2.12 Date and time
The date and time can be set using either the
handset or the base unit.
2.12.1 With the handset
Make sure the base unit and the handset are
not being used.
1 Press {MENU}.
2 Scroll to “Date and time” by pressing
{v} or {e}.
3 Press the soft key ({SELECT}).
L The cursor (|) will appear on the display.
4 Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2004
Press {0}{8} {1}{0} {0}{4}.
5 Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “AM” or
“PM”.
Example: 10:15 PM (12 hour clock entry)
1. Press {1}{0}{1}{5}.
2. Press {*} repeatedly to display “PM”.
6 Press the soft key ({SAVE}).
L If the handset beeps 3 times, the setting
is not correct. Start again from step 4.
7 Press {OFF}.
To check the date and time
Repeat steps 1 to 3.
L The date and time will be displayed. When
finished, press {OFF}.
To correct a mistake
Press the soft key ({<}) or ({>}), {v} or {e} to
move the cursor to the incorrect number, and
make the correction.
2.12.2 With the base unit
1 Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[()]
2 Press {<} or {>} repeatedly to display the
following.
SETDATE&TIME
PRESS SET
3 Press {SET}.
L The cursor (|) will appear on the display.
M:|01/D:01/Y:04
TIME: 12:00AM
4 Enter the current month/date/year by
selecting 2 digits for each.
{SELECT}{SAVE}
{OFF}
{MENU}
{e}{v}
{<}
{>}
BACK
SELECT
SAVE
SAVE
SAVE
{SET}
{MENU}
{<}{>}
FPG391_en.book Page 31 Friday, July 16, 2004 5:38 PM