Filter
Top Products
Monitors and Cameras
3 - 5
4. Select and configure these settings:
Setting Description
Monitor 3
(VCR/DVD)
Specifies the aspect ratio for recording.
•Off — Select if you do not have a VCR or DVD player
connected to record video conferences.
•4:3 — Select to record for playback on a standard monitor.
•16:9—Select to record for playback on a wide-screen monitor,
if your recording device has this capability.
Video Format Specifies the VCR or DVD player’s format:
•S-Video — Select if the VCR or DVD player is connected to
a Polycom HDX system using an S-Video cable.
•Composite — Select if the VCR or DVD player is connected
to a Polycom HDX system using a composite video cable and
S-Video to RCA adapter.
VCR/DVD
Record
Source
Specifies the video source to be recorded to videotape or DVD.
If Far is enabled, the recorded video will switch to the current far
site speaker. If both Near and Far are enabled, the recorded
video will switch between near and far sites depending on the
current speaker.
Output Upon
Screen Saver
Activation
Specifies the screen saver output for a VCR or DVD player:
Specifies whether black video or no signal is sent to the VCR or
DVD player when the system goes to sleep and the screen saver
activates.
Select Black if you want to send black video.
Select No Signal if you want the VCR or DVD player to react as if
it is not connected when the system goes to sleep.