Filter
Top Products
102 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
9 Click Reset (under Administration menu) to save your configuration.
7.6.2.2 Configuring LDAP Replicator (Sync Master)
In a KWS600v3 Multi-cell solution the Sync Master needs access to the information (such
as system ARI code and user data) that is stored on the Master KWS600v3/LDAP Server.
Therefore, it is necessary to activate the LDAP replicator services for the Sync Master.
1 Under
the Configuration menu, click LDAP, and then click Replicator.
Figure 39 Adm. Page: Configuration/LDAP/Replicator page
2 Select the Enable check box.
3 In the Server field,
type the IP address of the LDAP Server
4 In the User fie
ld, type the user name.
5 In the Pass
word field, type the password.
Note: Use
r name and password must be the same as for the Master (Primary)
KWS600v3.
6 Clic
k OK.
7 Clic
k Reset (under Administration menu) to save your configuration.