Filter
Top Products
114 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
7.6.4.5 Configuring DECT Master (Secondary)
On the Master page you need to define the KWS600v3 as a Secondary KWS600v3.
1 Under
the Configuration menu, click DECT, and then click Master.
Figure 55 Adm. Page: Configuration/DECT/Master page
2 From the Mode list, select Off. Selecting Off defines the KWS600v3 as a Secondary.
3 Check that
the protocol H323 is selected from the Protocol list.
Note: The H.3
23 Protocol is always used for internal communication between
KWS600v3 secondaries, regardless of the protocol used in the Master KWS600v3.
4 Clic
k OK.
5 Clic
k Reset (under Administration menu) to save your configuration.