Polycom 14117800 Server User Manual


 
145
KIRK Wireless Server 600v3 Installation and Configuration Guide
Chapter 8 KIRK Handset Registration and Subscription
This section provides information about handset registration and subscription. You must
register and subscribe a handset before you can use it.
Note: This section only describes how to register handsets on the Master KWS600v3/
LDAP server. You also need to register the users on the call handler. For registering users
on the call handler, refer to the call handler user guide.
When registering handsets you enter information about the handsets settings (such as;
the handsets serial number (IPEI), name etc.) in the system database. When subscribing
handsets you subscribe a registered handset to the system for usage. If the handset is not
registered in the system database, subscription of the handset is not possible.
This section includes information about:
Registering KIRK Handsets on page 145
“Subscribing KIRK Handsets” on page 152
8.1 Registering KIRK Handsets
To register handsets you use the web based Administration Page of the KWS600v3.
Note: If using an LDAP Server, the handsets must be registered on the LDAP Server and
not on the Master (Primary) KWS600v3.
Each handset in the wireless solution must be programmed with the serial number (IPEI)
before it can operate. This serial number must be registered in the web based
Administration Page of the KWS600v3. Serial numbers are a unique fingerprint of each
handset. The serial number is programmed into the handset during the manufacturing
process and cannot be changed by field personnel.
Note: The KWS600v3 does not provide any service to a handset whose serial number is
not registered in the web based Administration Page.
For more information about accessing the Administration Page, see “Accessing the Web
Based Administration Page” on page 79.
This section describes how to register handsets using:
“Registering Handsets Using Skinny Protocol” on page 145
“Registering Handsets Using H.323 Protocol” on page 147
“Registering Handsets Using SIP Protocol” on page 149
8.1.1 Registering Handsets Using Skinny Protocol
1 Under Administration menu, click DECT, and then click Users.
The following window appears.