Filter
Top Products
System Management 179
KIRK Wireless Server 600v3 Installation and Configuration Guide
1 Under the Administration menu, click Upload, and then click Firmware.
Figure 114 Adm. Page: Administration/Upload/Firmware page
2 Click Browse.
A dialog box appears.
3 Select
the firmware in question, and then click Open.
4 Clic
k Upload.
Wait until the system has finished updoading.
Note: Do not inter
rupt firmware upload. If this process is interrupted, the firmware
in the KWS600v3 will be defect.
Note: If the firmwar
e upload is interrupted, the firmware must be uploaded again
before rebooting the system.
5 Click
either Reset Immediately or Idle Reset.
When resetting the KWS600v3
immediately, all calls are terminated and the
KWS600v3 is reset. When resetting the KWS600v3 when the system is idle, the reset is
done when there are no active calls in the KWS600v3.
10.1.9.3 Updating Radio File
The radio file of the KWS600v3 can be updated. To update the radio file you load a file to
the system. Contact your distributor for newest software.