Filter
Top Products
186 Messaging over MSF
14117800, Ed.2.6
Confirmation of sent messages having been received is done by the recipient
answering the message. It is also shown in the system as an acknowledgement of each
message having reached the handset display. If a message does not receive an answer
within a specified period of time (for instance 30 seconds) it is possible to preset the
system to automatically send it to another relevant user.
When writing an MSF message it is possible to send it:
• An MSF message can be sent to a single handset as a Two Way Text message.
The system can handle a maximum of 26-30 messages per minute being sent
simultaneously from the system to a number of handsets.
•Broadcast
• An MSF message can be sent to all handsets at the same time as a One Way Text
message.
The system can handle a maximum of 26-30 messa
ges per minute to all handsets
simultaneously from the system.
11.2 Activating MSF Messages Function
This section describes how to enable the MSF messages function by activating the
TELNET system.
1 Un
der the Configuration menu, click General, and then click Telnet.
Figure 120 Adm. Page: Configuration/General/Telnet page
2 Select the Enable Telnet check box.
3 Click OK.
The configuration has now been changed and the TELNET system is
activated,
making it possible to send MSF messages.