Filter
Top Products
108 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
2 From the Mode list, select Standby. Selecting Standby defines the KWS600v3 as an
alternative Master (Standby).
3 C
heck that the settings for Protocol, GK (Gate Keeper - Primary call handler), Alt-GK
(Alternative Gate Keeper - Secondary call handler) are identical to the settings for the
Master (Primary) KWS600v3.
4 Clic
k OK.
5 Clic
k Reset (under Administration menu) to save your configuration.
7.6.3.5 Configuring DECT Radio (Standby)
1 Under the Configuration menu, click DECT, and then click Radio.
Figure 48 Adm. Page: Configuration/DECT/Radio page
2 Select the Disable check box to disable the radio.
3 Clic
k OK.
4 Clic
k Reset (under Administration menu) to save your configuration.
The alternative (Standby) Master KWS600v3 is now configured.
7.6.4 Configuring the Secondary KIRK Wireless Server 600v3
This section describes how to configure KWS600v3 secondaries in a multi-cell solution.
After configuring the Master (Primary) KWS60
0v3, you need to configure each
Secondary KWS600v3 to be used in the system one by one.