Filter
Top Products
KIRK Handset Registration and Subscription 149
KIRK Wireless Server 600v3 Installation and Configuration Guide
3 In the Long Name field, type any name. It is recommended to type the same
information as in the Name field (see step 4 below).
4 In the Name field, type SEP followed by the IPEI number of the handset.
The serial number (IPEI number) consists of a five-digit handset type (manufacturer
code) and a seven-digit handset number.
For more information about retrieving the IPEI number (serial number), refer to
Retrieving the Serial Number of the KIRK Handset on page 73
For more general information about the IPEI number (serial number), refer to
“Registering KIRK Handsets” on page 145.
5 In the Number field, type the H.323 registration number.
6 In the Auth. Name field, enter the auth. name (SIP and H323 only).
7 In the Password field, enter the password (SIP and H323 only).
8 In the Display Text field, type a standby text (max. 36 characters) to be displayed
when the handset is on hook.
9 In the IPEI field, type the IPEI number of the handset.
10 In the Auth. Code field, type the authentication code (AC)(optional).
The authentication code is a subscription password of a maximum eight digits,
defined by the technicians, and can be used when connecting the handset to the
KWS600v3. The authentication code is a subscription pin code for the individual
handset.
11 Click Apply.
12 Repeat step 1 to 9 for each new handset to be registered to the system.
13 Click OK to save the registration(s).
In the DECT/Users page the new handset/user now has the status Pending, meaning
that it is ready for subscription.
8.1.3 Registering Handsets Using SIP Protocol
1 Under Administration menu, click DECT, and then click Users.
The following window appears.