Filter
Top Products
112 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
5 In the IP address field, type the new IP address.
The new IP address is now the default address w
hen accessing the KWS600v3.
6 In the Network mask fie
ld, type a new network mask.
7 In the Defau
lt gateway field, type the IP address of the default gateway.
Contact your system administrator for more
information.
8 Clic
k OK.
9 Clic
k Reset (under Administration menu) to save your configuration.
7.6.4.3 Configuring Ethernet Link (Secondary)
1 Under the Configuration menu, click ETH0, and then click Link.
Figure 53 Adm. Page: Configuration/ETH0/Link page
2 From the Link list, select auto, and then click OK.
When selecting auto,
the link speed will be determined by the network switch.
3 Clic
k Reset (under Administration menu) to save your configuration.