Filter
Top Products
Preparing KIRK Handset for Use 69
KIRK Wireless Server 600v3 Installation and Configuration Guide
Figure 2 Remove Back Cover from Handset with Screw Fastener
3 Place the battery plug in the slot in the battery box.
4 Inse
rt battery with the label readable.
5 Replace t
he back cover.
6.4.1 Installing Battery on KIRK 5020 / 5040 Handsets
1 To install the battery press down the back cover and slide it towards the bottom of the
handset.
Figure 3 Remove Back Cover from Handset
2 Lift off back cover.
3 Inse
rt battery with the label readable.
4 Replace t
he back cover by pressing the back cover back in the locked position (when
you hear a click the back cover is in position).