Filter
Top Products
Installing the KIRK Repeater 63
KIRK Wireless Server 600v3 Installation and Configuration Guide
For more information about programming the repeater with the ServiceTool, refer to the
Help File in the ServiceTool. The ServiceTool is to be downloaded from
www.polycom.com.
252 60 124 188
253 61 125 189
254 62 126 190
255 63 127 191
Note
Repeater and base station numbers must not be the same. Neither can the
repeater have a number similar to another base station or another repeater
in a situation where common overlap is present between the actual units
(Numbers with red colour show where numbering could be identical
between different units). If this occurs, handover between the different
units is not possible.
Numbering of base stations and repeaters in a normal configuration
First repeater No. of base station + 64
Base to synchronize on: Number of base station
Second repeater No. of base station + 128
Base to synchronize on: Number of base station
Third repeater No. of base station + 192
Base to synchronize on: Number of base station
Numbering of repeaters in a repeater jump configuration
First repeater in chain No. of base station + 64
Base to synchronize on: Number of base station
Second repeater in chain No. of base station + 128
Base to synchronize on: Number of previous repeater
Third repeater in chain No. of base station + 192
Base to synchronize on: Number of previous repeater
Table 5-3 Example
of a Normal Base Station/Repeater Configuration
Table 5-4 Example
of Repeater Jump Configuration
Table 5-2 Repeater Numbering in a Multi Cell Solution
Base Station Repeater 1 Repeater 2 Repeater 3