Filter
Top Products
126 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
This section describes how to configure a KWS600v3 Multi-cell solution.
Figure 67 Wireless Server 600v3 Multi-cell installation
This section contains information about:
• “Configuring the IP Master (Primary) KIRK Wireless Server 600v3” on page 91
• “The Sync Master is now configured.” on page 104
• “” on page 132
• “” on page 133
• “” on page 136
• “” on page 108
• “Saving Configurations” on page 141
• “” on page 141
• “Opening Configuration Files” on page 144
7.8.1 Configuring the Master (Primary) KIRK Wireless Server 600v3
Note: To configure a KWS600v3 Multi-cell solution it is necessary to obtain a multi-cell
license. (E-mail the MAC address to the emeadkordermanagement@polycom.com, and
you will receive an e-mail containing a text file with the multi-cell license. This file must
be saved in order to be uploaded to the system).
In the Master ta
b you configure the Master (Primary) KWS600v3.