Filter
Top Products
Configuring KIRK Wireless Server 600v3 95
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.1.4 Configuring Ethernet Link (Primary)
1 Under the Configuration menu, click ETH0, and then click Link.
Figure 31 Adm. Page: Configuration/ETH0/Link page
2 From the Link list, select auto, and then click OK.
When selecting auto,
the link speed will be determined by the network switch.
3 Clic
k Reset (under Administration menu) to save your configuration.
7.6.1.5 Setting LDAP Mode (Primary/LDAP Server)
For the Master (Primary) KWS600v3 to act as an LDAP Server for all the KWS600v3
secondaries, you need to set the LDAP (Lightweight Directory Access Protocol) mode.
Note: It is re
commended that the Primary KWS600v3 acts as an LDAP Server in small to
medium-sized installations.
1 Under
the Configuration menu, click LDAP, and then click Server.
Figure 32 Adm. Page: Configuration/LDAP/Server page
2 In the User fields, type the user names.