Polycom 14117800 Server User Manual


 
94 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
9 Click Reset (under Administration menu) to save your configuration.
7.6.1.3 Obtaining a Multi-Cell License (Primary)
To configure a KWS600v3 Multi-cell solution it is necessary to obtain a multi-cell license.
(E-mail MAC address to emeadkordermanagement@polycom.com, and you will obtain
the license)
1 Under
the Configuration menu, click General, and then copy the serial number of
the KWS600v3 from the Info page.
2 E-mail
MAC address to emeadkordermanagement@polycom.com and require a
multi-cell license for the KWS600v3.
Note: Remember t
o write/paste the MAC address of the KWS600v3 in the e-mail.
3 You will
now receive an e-mail containing a text file with the multi-cell license.
Save this file. The text file is t
o be uploaded to the system.
4 Under
the Configuration menu, click General, and then click License.
Figure 30 Adm. Page: Configuration/General/License page
5 Click Browse to search for the text file containing license information, select it, and
then click Open.
6 Clic
k Upload to upload the file.
7 Click
either Reset Immediately or Idle Reset.
When resetting the KWS600v3
immediately, all calls are terminated and the
KWS600v3 is reset. When resetting the KWS600v3 when the system is idle, the reset is
done when there are no active calls in the KWS600v3.
8 Clic
k the License menu again to check that the file has been uploaded.