Filter
Top Products
Configuring KIRK Wireless Server 600v3 115
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.4.6 Configuring DECT System (Secondary)
1 Under the Configuration menu, click DECT, and then click System.
Figure 56 Adm. Page: Configuration/DECT/System page
2 In the Name field, the name MUST ALWAYS be DECT.
If changing the name, the system cannot operate.
3 In the PWD (password)
field, type the password, and then type it again in the field
below.
Note: If y
ou have changed the password when configuring the Master (Primary)
KWS600v3, you must use this when configuring the alternative Master (Standby)
KWS600v3 and KWS600v3 secondaries.
4 Clic
k OK.
5 Clic
k Reset (under Administration menu) to save your configuration.