Filter
Top Products
Installing the KIRK Wireless Server 600v3 45
KIRK Wireless Server 600v3 Installation and Configuration Guide
4.2.4.2 Faceplate
LED Indicator Description - Faceplate
LED Indicator Meaning
LINK Indicator - yellow link layer software has established connection
100 Indicator - green line speed is 100Mbit/sec.
Alarm Indicator - red KWS600v3 software is in error mode
Ready Indicator - green KWS600v3 software is up running in normal mode
Power Indicator - yellow KWS600v3 is connected to Power
4.2.5 KIRK Wireless Server 600v3 - Reset Button
It is possible to restart or reset the KWS600v3 by pressing the Reset button on the
faceplate of the KWS600v3. For description of the faceplate, refer to “Faceplate” on page
45.
4.2.5.1 Resetting the KIRK Wireless Server 600v3 Hardware
This section contains description of the different actions that take place when pressing
the Reset button.
Fast green flashing
(light appears orange because of
the steady red)
empty system
Slow green flashing
(light appears orange because of
the steady red)
in operation with one or more
active connections
Slow red flashing in operation with the maximum active connections (busy)
Fast red flashing Out of sync.
Table 2 LED Indicator Description - Front Cover