Filter
Top Products
Configuring KIRK Wireless Server 600v3 113
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.4.4 Setting LDAP Replicators (Secondary)
In a KWS600v3 Multi-cell solution the Secondary KWS600v3 needs access to the
information (such as system ARI code and user data) that is stored on the Master
KWS600v3/LDAP Server. Therefore, it is necessary to activate the LDAP replicator
services for the Secondary KWS600v3.
1 Under
the Configuration menu, click LDAP, and then click Replicator.
Figure 54 Adm. Page: Configuration/LDAP/Replicator page
2 Select the Enable check box.
3 In t
he Server field, type the IP address of the Master KWS600v3 - or the LDAP Server,
if this is part of your installation.
4 In the User fie
ld, type the user name.
5 In the Pass
word field, type the password.
Note: Th
e password will be verified against the Master KWS600v3.
6 Clic
k OK.
7 Clic
k Reset (under Administration menu) to save your configuration.