Filter
Top Products
152 KIRK Handset Registration and Subscription
14117800, Ed.2.6
8.2 Subscribing KIRK Handsets
8.2.1 KIRK 3040 Handset
A handset can be subscribed to more systems and will automatically log on to the
relevant system. If a handset is subscribed to two or more systems, you can use Auto
Login type A to change between the systems automatically.
When to use Auto Login type A:
• Auto Login A should only be used in separate systems without overlaps.
If a handset looses signal from the system (the display showing Out of Range), then
after 20 seconds the handset will start searching for an alternative system available
from the Login list and automatically change to this system.
Note: Using Auto Login A any call will be dropped when changing to an alternative
system.
This section provides information about:
• “Subscribing Handsets” on page 152
• “Subscribing a Handset to Different Systems” on page 153
Note: Subscription of handsets requires the use of each registered handset.
Note: To make subscriptions, the system must allow subscriptions to be made. Some
systems also require an Authentication Code (AC). If more than one system currently
permits subscription, you will need to know the ID of the system (ARI code) to which
you wish to subscribe. Authentication Codes and system ID’s (ARI codes) will be
provided by the system administrator.
Before subscribing handsets you need to ensure:
• that handset battery has been charged (“” on page 71). Low battery could cause subscription problems.
• that the handsets have been registered to the system (“Registering KIRK Handsets” on page 145).
8.2.1.1 Subscribing Handsets
1 Press MENU - go to MENU LOGIN.
2 Press 3 - go to SUBSCRIPTION CREATE to subscribe to a system.
3 Press 3. The handset searches for the serial number of the system.
4 Use the < > keys to scroll between the IDs systems if there is more than one system
available.
During subscription, the handset searches for free positions and performs
subscription on the first free position.
5 As soon as the correct serial number of the system appears in the display, press 3.
The serial number is located on the label on the rear of the KWS600v3.