Polycom 14117800 Server User Manual


 
Configuring KIRK Wireless Server 600v3 105
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.3.1 Entering a System User Name and Password (Standby)
First time you access the Administration Page, you need to log on with user name and a
password.
Note: The de
fault user name of the system is admin and the default password of the
system is ip1200.
Figure 43 Adm. Page: Enter Network Password dialog box
1 In the User Name field, type the user name.
2 In the Pass
word field, type the password.
3 Clic
k OK.
7.6.3.2 Assigning a Specific IP Address (Standby)
To assign a specific IP address to the KWS600v3, it is necessary to disable the DCHP
mode and then assign a specific IP address to the KWS600v3. The new IP address and
network address will be provided by the system administrator.