Filter
Top Products
Using Your Conference Phone in SIP Mode
97
Receiving PTT Broadcasts When You’re Not in an Active Call
If you receive a broadcast and you’re not in an active call, the broadcast
displays on the screen and immediately plays, regardless of the broadcast
priority.
Receiving PTT Broadcasts During Active Calls
How you handle a broadcast when you’re in an active call depends on the
broadcast priority and if you’re allowed to receive a broadcast when you’re in
an active call.
If the broadcast isn’t a Priority or Emergency page:
• If your phone is allowed to receive broadcasts during active calls, the
broadcast displays on your phone and immediately plays, as shown next.
(You’ll need to scroll to the broadcast to see it.) You’ll hear both the
original call and the broadcast. To listen to just the broadcast, hold or end
the original call.
• If your phone isn’t allowed to receive broadcasts during active calls, the
broadcast displays on your phone in a ‘pending’ state, as shown next.
When a broadcast is pending, you can’t hear the broadcast audio. To place
the original call on hold and listen to the broadcast, scroll to the broadcast,
and then press the Accept soft key. To remove the broadcast from the
screen, press the Reject soft key.
If it’s a Priority or Emergency broadcast, the broadcast displays on your screen
and immediately plays. You’ll hear both the original call and the broadcast. To
listen to only the broadcast, hold or end the original call.