Filter
Top Products
Using Your Conference Phone in SIP Mode
67
To transfer a call:
1 During a call, press the Trnsfer soft key.
The active call is placed on hold.
2 Place a call to the party to whom you want to transfer the call.
3 When you hear the ring-back sound, or after you speak with the other
party, press the Trnsfer soft key to transfer the call.
To cancel the transfer before the call connects, and return to the original
call, press the Cancel soft key.
Hosting Conference Calls
You can create a conference with up to two other parties.
After you set up a conference, you can place the conference call on hold, split
the conference call into two held calls, or end your connection to the
conference call participants.
If the conference management feature is enabled on your phone, you can mute,
hold, and remove individual conference participants.
This section includes the following topics:
• Setting Up Conferences on page 67
• Holding and Resuming Conferences on page 68
• Splitting Conferences into Two Calls on Hold on page 69
• Ending Conferences on page 69
• Managing Conferences on page 69
Setting Up Conferences
You can set up a conference in one of two ways:
• Using the Confrnc soft key or .
• Using the Join soft key, if you have an active call and a held call.
Note
You can automatically transfer the call without speaking to the second party:
During a call, press the Trnsfer soft key, and then press the Blind soft key. Then,
place a call to the party to whom you want to transfer the call. The transfer
automatically completes.
• One of the parties in a conference call can be a mobile phone or computer audio
source. For information on setting up and managing conferences with computer
or mobile phone audio, see Connecting Mobile Phone and Computer Audio on
page 89
• For tips on hosting conference calls and conference call etiquette, see Polycom
Conference Call Etiquette.