Filter
Top Products
FIM
129
FIM
The FIM (Facing Identification Mark) bar code structure is shown in Figure 18
and Figure 19 and described on the following pages. The left boundary must
begin 3 inches from the right edge of the mail piece. The right-most bar must
be 2 inches ± 1/8-inch from the right edge of the mail piece. Bars must be 5/8-
inch
± 1/8-inch tall; the top of the bars must be no lower than 1/8-inch from
the top edge of the mail piece (and may touch the top edge of the mail piece).
The bar code baseline must be within 1/8-inch from the bottom edge of the
clear zone.
Figure 18. FIM Structure
Return Address Area
5/8"
1-1/4"
(Optional Line)
(Top Line)
(Optional Line)
(Line Above Last)
(Last Line)
NON-ADDRESS DATA
NAME OF RECIPIENT
INFORMATION/ATTENTION LINE
DELIVERY ADDRESS
POST OFFICE STATE ZIP
SR, SC
POSITION
1-3/4"
Clear
3"
1/8"
2"- 1-7/8"
NOTE: Illustration is not to scale
Zone