Printronix LQH-HWTM Printer User Manual


 
UPC-A
189
PDF Optional parameter which affects printing of the
human readable data field. The data field will print
automatically unless the PDF-suppress command
is specified in the
FONT
parameter. UPC-A human
readable fields can be printed above or below the
bar code symbol. If the PDF command is not
entered in the UPC-A command format, the data
field automatically prints in OCR-B.
LOC
Optional parameter to identify the location of the
printable data field. The default value is B, locating
the human readable data below the bar code. A
locates the printable data field above the bar code.
To compensate for printing the 0.1-inch high data,
the height of the bar code body is reduced 0.1-inch.
FONT
Optional parameter to select the font for the human
readable data field. The default font type for UPC-A
bar codes is OCR-B; if no PDF command is
entered in the command format, the data field is
printed automatically in OCR-B. Entering X will also
designate the OCR-B type font. Enter N to select
the normal ASCII 10 cpi font; enter O to select the
OCR-A 10 cpi font. Enter P to select 12 cpi. Enter Q
to select 13 cpi. Enter R to selct 15 cpi. Enter T to
select 17 cpi. Enter V to select 20 cpi. Enter S to
suppress printing the data field and the trailing
lower portions of the UPC bar code.
STOP Ends the Bar Code command while the IGP
continues in the Create Form mode. Enter STOP. If
STOP is not entered, an error message results.