Filter
Top Products
215
4 Form Examples and
Exercises
Form Examples
The following example demonstrates how to use Create commands in the
Create Form mode using the CP.DP format. The printed output for this
program is shown in Figure 46 on page 217. The box surrounding the form
represents the paper size.
IMPORTANT
The examples in this chapter assume the Select Format command is
already enabled (~SFON). When enabled, Select Format tells the IGP to
ignore all host-generated paper movement commands (CR, LF, FF).
Example: Basic Create Form
~LISTEN
~LOGO;HAND;56;60
1;40-42
2;38-42
3;36-42
4;35-42
5;33-41
6;31-40
7;30-38
8;29-36
9;28-35
10;27-34;52-54
11;24-33;48-54
12;22-31;45-54
13;19-30;41-54
14;16-29;38-53
15;13-29;36-51
16;11-29;33-48
17;9-44
18;7-42
19;6-39
20;4-36
Note If comment lines are used on command lines, they must be
preceded by a slash (/). Do not use / comments on lines
containing an SFCC (NORMAL, CREATE, EXECUTE, etc.).
Comments in parentheses in this section are provided for
better understanding of IGP operation but should not be
included in your IGP files.