Filter
Top Products
52
Chapter 2 Command Codes
c. To specify the default forms length of 792 dot
rows (11 inches at 6 lpi), do not enter a value
in the form length parameter.
DISK Optional parameter to store the form on the
printer’s flash memory. Enter DISK.
Example The following command creates a form named ORDER with the
default forms length:
(cc)CREATE;ORDER
Delete Form
Purpose Deletes the form identified by the form name from the directory
and the IGP memory.
Mode NORMAL
Format (cc)DELETE FORM;
formname
[;DISK]
(cc) The Special Function Control Code.
DELETE FORM
The Delete Form command; enter DELETE FORM.
formname
Identifies the form to be deleted. Enter the name of
the form exactly as it was created. You can delete
an entire form directory by inputting *ALL as the
form name.
DISK Optional parameter to delete the form from the
flash memory where it was originally stored. Enter
DISK.
Comments For more information, refer to the Directory Example on page 247
and the Delete Example on page 248.
Example The following command deletes the form named “PAY#” from the
directory, IGP memory, and the printer’s flash memory.
~DELETE FORM;PAY#;DISK