Filter
Top Products
Modes of Operation
19
Table 2. Create Form Mode Commands
Command Mnemonic Description Page #
Alphanumerics ALPHA Defines size, location, and content of alphanumeric characters
and dynamic alphanumeric data fields.
29
Alpha, Incremental ALPHA Defines starting data and increment amount for fixed auto-
increment fields.
34
Bar Codes BARCODE Each bar code type has its own command to define size,
location, orientation, and data as described in the “Bar Codes”
chapter.
Chap. 3
Boxes BOX Defines size, location, and thickness of boxes. 43
Corners CORNER Defines vertical and horizontal length, location, and thickness
of a set of four corners.
49
Duplication,
Horizontal
HDUP Defines the number of horizontal duplications of an element
and the spacing between duplications.
54
End END Terminates the Create Form Mode. 57
Form Length LFORM Specifies the form length by total number of lines at 6 or 8 lpi. 70
Ignore Sequence
On/Off
IGON
IGOFF
Enables the IGP to ignore all characters after the Ignore
Sequence On command is sent until the Ignore Sequence Off
command is sent. See Note on page 20.
71
Lines, Horizontal HORZ Defines the location, size, and thickness of horizontal lines. 72
Lines, Vertical VERT Defines the location, size, and thickness of vertical lines. 73
Logo Call LOGO Specifies the location of a previously defined logo. 74
Multinational
Character Set
ISET Selects one of the multinational or international character sets. Chap. 5
Page Number PAGE Defines the location for automatically incremented page
numbers.
78
Reverse Print REVERSE Defines the location for white-on-black printing and selects the
background shade.
82
Scale SCALE Defines the vertical spacing and horizontal pitch for data
positioning in character or dot columns and rows.
83
Select Format
On/Off
SFON
SFOFF
Ignores all host-generated paper movement commands. See
note on page 20.
84