Filter
Top Products
PostBar and Royal Mail (KIX)
165
SR
Defines the starting row for the bar code. Character
row or dot row is specified based on the Scale
command (page 83), or use the CP.DP format
(page 26).
SC
Defines the starting column of the bar code.
Character column or dot column is specified based
on the Scale command (page 83), or use the
CP.DP format (page 26).
(D)
The printable character (delimiter) identifying the
start and finish of the data field. Enter any printable
character other than a slash (/) the SFCC, or a
character used within the data. The same character
must be used at both ends of the data field but it will
not print with the data.
data field
The bar code data. For PostBar, enter values 0
through 3 to represent the four different types of
bars. For Royal Mail, enter alphanumeric data (A
through Z and 0 through 9). If using the KIX format
for Royal Mail, lowercase characters a through z
are also valid.
STOP Ends the Bar Code command while the IGP
continues in the Create Form Mode. Enter STOP. If
STOP is not entered, an error message will result.