Filter
Top Products
Delete Logo
53
Delete Logo
Purpose Deletes the logo identified by the logo name from the directory
and the IGP memory.
Mode NORMAL
Format (cc)DELETE LOGO;
logoname
[;DISK]
(cc) The Special Function Control Code.
DELETE LOGO
The Delete Form command; enter DELETE LOGO.
logoname
Identifies the logo to be deleted. Enter the name of
the logo exactly as it was created. You can delete
an entire logo directory by inputting *ALL as the
logo name.
DISK Optional parameter to delete the logo from the flash
memory where it was originally stored. Enter DISK.
Comments Printing a form that contains a deleted logo will produce an error
message. For more information, refer to the Directory Example
and the Delete Example on pages 205 and 207.
Example The following command deletes the logo named “MEMO” from
the directory, IGP memory and the printer’s flash memory.
~DELETE LOGO;MEMO;DISK
Directory
Purpose Prints the following information: (1) all defined forms and logos,
(2) logo assignment to forms, and (3) memory usage and
availability.
Mode NORMAL
Format (cc)DIRECTORY [;DISK]
(cc) The Special Function Control Code.
DIRECTORY The Directory command; enter DIRECTORY.
DISK Optional parameter to specify the forms and logos
stored on the flash memory. Enter DISK.
Comments As many forms and logos as printer memory allows may be
stored in IGP memory. If the memory is full, the form will not print;
available space in the memory must be at least the size of the
form being executed.
For more information, refer to the Directory Example on page
247.