Sharp PNSV01 Computer Accessories User Manual


  Open as PDF
of 117
 
101
FTP Server/Client Scheduler
[Display Area] tab
• “Displayareafordistributedprogram”
When the display area of the program and the resolution
of the panel are different, this tab allows you to display the
program regardless of the display area set for the program.
 Checkthe“Alwaysdisplaythedistributedprograminthe
followingarea”checkboxandsettheareainwhichthe
program is to be displayed.
[Power Control] tab
ManagespowerontargetPCscurrentlybeingconfigured.
• “Shutdownonthedesignatedtime”checkbox
CheckthisboxtoturnoffthetargetPCatthespecifiedtime.
• “Rebootonthedesignatedtime”checkbox
CheckthisboxtorestartthetargetPCatthespecifiedtime.
[FTP Server] tab
SetstheFTPServer.
• “Username”:Mustbekeptwithin30alphanumeric
characters.
• “Password”:Mustbekeptwithin30alphanumeric
characters.
• “PortNumber”:Enteravaluebetween1and32000.
IfyouhaveinstalledtheViewerVersion,auniqueFTPServerwillbeinstalled,andstartedasa
service.ThedefaultTCP/IPportnumbersare20and21.Ifthisportnumberisalreadyusedby
anotherservice,changetheportnumber.TheFTPsettingsofthepanelsregisteredwith“Panel
Management”onthecontrolPCmustusethesameportnumber.(Fp.80)
[Panel Control] tab
• “Nopanel”optionbutton
Panels will not be controlled.
• “Singlepanel”optionbutton
Click[ConnectionSetting]andselectthepanelcontrol
method(RS-232C/LAN).
• [ConnectionSetting]
 Selecteither“RS-232C”or“LAN”fromthe[Connecting
interface]optionbuttons.
Setting Description Default
RS-232C
COMport COM1~COM256 COM1
Baud Rate 9600,19200,38400 9600
LAN
Host name or IP
address
EnterthehostnameortheIPaddressofthepaneltobe
controlledwithin32alphanumericcharacters.
-
Data port
Enteradataportnumberbetween1025and65535forthe
panels to be controlled.
10008
Username
Entertheusername,ifoneexistsforthepanelstobe
controlled,in8charactersorless.
-
Password
Enterthepassword,ifoneexistsforthepanelstobe
controlled,in8charactersorless.
-
Client Scheduler
 previous next