DE2-70 User Manual
71
RCA type, then an adaptor will be needed to convert to the mini-stereo plug supported on
the DE2-70 board; this is the same type of plug supported on most computers
• Load the bit stream into FPGA.
• The detailed configuration for switching video source of main and sub window are listed in
Table 6.1.
Figure 6.4 illustrates the setup for this demonstration.
PIP_Control
To
TV_to_VGA
VGA(LCD/CRT)Monitor
VGA Out
Figure 6.4. The setup for the TV box PIP demonstration.
Configuration VGA Display Mode Video source
SW[17] = OFF; Signal display mode Video in 2