Filter
Top Products
Advanced Configuration
6-25
CLI Commands for 802.1X Authentication – Use the 802.1X
supported command from the global configuration mode to
enable 802.1X authentication. Set the session and broadcast key
refresh rate, and the re-authentication timeout. To display the
current settings, use the show authentication command from
the Exec mode.
AP(config)#802.1X supported 7-51
AP(config)#802.1X broadcast-key-refresh-rate 5 7-52
AP(config)#802.1X session-key-refresh-rate 5 7-53
AP(config)#802.1X session-timeout 300 7-54
AP(config)#exit
AP#show authentication 7-60
Authentication Information
=========================================================
MAC Authentication Server : REMOTE
MAC Auth Session Timeout Value : 300 secs
802.1X : SUPPORTED
Broadcast Key Refresh Rate : 5 min
Session Key Refresh Rate : 5 min
802.1X Session Timeout Value : 300 secs
Address Filtering : DENIED
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address Status
----------------- ----------
00-70-50-cc-99-1a DENIED
00-70-50-cc-99-1b ALLOWED
=========================================================
AP#