Filter
Top Products
VLAN Commands
7-125
Example
Related Commands
native-vlanid (page 7-125)
native-vlanid
This command configures the native VLAN ID for the wireless
bridge.
Syntax
native-vlanid <vlan-id>
vlan-id - Native VLAN ID. (Range: 1-64)
Default Setting
1
Command Mode
Global Configuration
Command Usage
When VLANs are enabled, the wireless bridge tags traffic
passing to the wired network with the configured native VLAN
ID (a number between 1 and 64).
Example
Related Commands
vlan (page 7-124)
AP(config)#vlan enable
Reboot system now? <y/n>: y
AP(config)#native-vlanid 3
AP(config)#