Filter
Top Products
General Commands
7-13
– Network or host unreachable - The gateway found no
corresponding entry in the route table.
• Press <Esc> to stop pinging.
Example
reset
This command restarts the system or restores the factory default
settings.
Syntax
reset <board | configuration>
• board - Reboots the system.
• configuration - Resets the configuration settings to the
factory defaults, and then reboots the system.
Default Setting
None
Command Mode
Exec
Command Usage
When the system is restarted, it will always run the Power-On
Self-Test.
Example
This example shows how to reset the system:
AP#ping 10.1.0.19
192.168.1.19 is alive
AP#
AP#reset board
Reboot system now? <y/n>: y