Filter
Top Products
Command Line Interface
7-76
Filtering Commands
The commands described in this section are used to control
access to the management interface from the wireless interface
and filter traffic using specific Ethernet protocol types.
filter local-bridge
This command disables communication between wireless clients.
Use the no form to disable this filtering.
Syntax
filter local-bridge
no filter local-bridge
Default
Disabled
Command Mode
Global Configuration
Command Function Mode Page
filter local-bridge Disables communication between
wireless clients
GC 7-76
filter ap-manage Prevents access to the management
interface over the wireless bridge link
GC 7-77
filter
ethernet-type
enable
Checks the Ethernet type for all
incoming and outgoing Ethernet
packets against the protocol filtering
table
GC 7-78
filter
ethernet-type
protocol
Sets a filter for a specific Ethernet
type
GC 7-79
show filter Shows the filter configuration Exec 7-80