Filter
Top Products
Authentication
7-57
Example
Related Commands
address filter entry (page 7-57)
show authentication (page 7-60)
address filter entry
This command enters a MAC address in the filter table.
Syntax
address filter entry <mac-address> <allowed | denied>
• mac-address - Physical address of client. (Enter six pairs of
hexadecimal digits separated by hyphens; e.g.,
00-90-D1-12-AB-89.)
• allowed - Entry is allowed access.
• denied - Entry is denied access.
Default
None
Command Mode
Global Configuration
Command Mode
• The access point supports up to 1024 MAC addresses.
• An entry in the address table may be allowed or denied
access depending on the global setting configured for the
address entry default command.
AP(config)#address filter default denied
AP(config)#