SMC Networks 2.4GHz/5GHz Network Router User Manual


 
Command Groups
7-9
Command Groups
The system commands can be broken down into the functional
groups shown below.
Command
Group
Description Page
General Basic commands for entering configuration
mode, restarting the system, or quitting the
CLI
7-10
System
Management
Controls user name, password, browser
management options, and a variety of other
system information
7-15
System Logging Configures system logging parameters 7-23
System Clock Configures SNTP and system clock settings 7-28
SNMP Configures community access strings and
trap managers
7-34
Flash/File Manages code image or wireless bridge
configuration files
7-39
RADIUS Configures the RADIUS client used with
802.1x authentication
7-45
Authentication Configures IEEE 802.1x port access control
and address filtering
7-49
WDS Configures the Wireless Distribution System
forwarding table
7-61
Bridge Configures MAC address table aging time
settings and spanning tree parameters
7-65
Filtering Filters access to the management interface
from wireless nodes, and filters traffic using
specific Ethernet protocol types
7-76
PPPoE Configures parameters for a PPPoE
management tunnel on the Ethernet interface
7-80
Ethernet
Interface
Configures connection parameters for the
Ethernet interface
7-91
Wireless
Interface
Configures connection parameters for the
wireless interface
7-97