SMC Networks 2.4GHz/5GHz Network Router User Manual


 
Advanced Configuration
6-3
Advanced Configuration
The Advanced Configuration pages include the following options.
Menu Description Page
System Configures basic administrative and client
access
6-4
Identification Specifies the system name, location and
contact information
6-4
TCP / IP Settings Configures the IP address, subnet mask,
gateway, and domain name servers
6-7
Radius Configures the RADIUS server for wireless
client authentication
6-10
PPPoE Settings Configures PPPoE on the Ethernet interface
for a connection to an ISP
6-13
Authentication Configures 802.1X client authentication and
MAC address authentication
6-16
Filter Control Enables VLAN support and filters traffic
matching specific Ethernet protocol types
6-26
SNMP Controls access to this wireless bridge from
management stations using SNMP, as well
as the hosts that will receive trap messages
6-30
Administration Configures user name and password for
management
access; upgrades software
from local file, FTP or TFTP server;
resets
configuration settings to factory defaults;
and resets the wireless bridge
6-33
System Log Controls logging of error messages; sets the
system clock via SNTP server or manual
configuration
6-38
WDS Sets the MAC addresses of other units in the
wireless bridge network
6-43
Bridge Sets the time for aging out entries in the
bridge MAC address table
6-45
STP Configures Spanning Tree Protocol
parameters
6-47