Filter
Top Products
Flash/File Commands
7-43
Default Setting
None
Command Mode
Exec
Caution: Beware of deleting application images from flash
memory. At least one application image is required in
order to boot the wireless bridge. If there are multiple
image files in flash memory, and the one used to boot
the wireless bridge is deleted, be sure you first use the
bootfile command to update the application image file
booted at startup before you reboot the wireless bridge.
Example
This example shows how to delete the test.cfg configuration file
from flash memory.
Related Commands
bootfile (page 7-40)
dir (page 7-43)
dir
This command displays a list of files in flash memory.
Command Mode
Exec
AP#delete test.cfg
Are you sure you wish to delete this file? <y/n>:
AP#