SMC Networks 2.4GHz/5GHz Network Router User Manual


 
Command Line Interface
7-38
Example
Related Commands
snmp-server enable server (page 7-36)
snmp-server location
This command sets the system location string. Use the no form
to remove the location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server contact (page 7-35)
AP(config)#snmp-server host 10.1.19.23 batman
AP(config)#
AP(config)#snmp-server location building-1
AP(config)#