SMC Networks 2.4GHz/5GHz Network Router User Manual


 
System Management Commands
7-15
Example
The console port settings are fixed at the values shown below.
System Management Commands
These commands are used to configure the user name,
password, browser management options, and a variety of other
system information.
AP#show line
Console Line Information
======================================================
databits : 8
parity : none
speed : 9600
stop bits : 1
======================================================
AP#
Command Function Mode Page
Country Setting
country Sets the wireless bridge country code
for correct radio operation
Exec 7-16
Device Designation
prompt Customizes the command line prompt GC 7-18
system name Specifies the host name for the
wireless bridge
GC 7-19
snmp-server
contact
Sets the system contact string GC 7-35
snmp-server
location
Sets the system location string GC 7-38
User Access
username Configures the user name for
management access
GC 7-19
password Specifies the password for
management access
GC 7-20