SMC Networks 2.4GHz/5GHz Network Router User Manual


 
Command Line Interface
7-56
Command Mode
Global Configuration
Command Usage
Ethernet and WDS user names and passwords must be set
before enabling the 802.1x supplicant feature for the
specified port.
The access point currently only supports EAP-MD5 CHAP
for 802.1x supplicant authentication.
Example
address filter default
This command sets filtering to allow or deny listed MAC
addresses.
Syntax
address filter default <allowed | denied>
allowed - Only MAC addresses entered as “denied” in the
address filtering table are denied.
denied - Only MAC addresses entered as “allowed” in the
address filtering table are allowed.
Default
allowed
Command Mode
Global Configuration
AP(config)#802.1x supplicant wds_user 1 David
AP(config)#802.1x supplicant wds_password 1 ABC
AP(config)#802.1x supplicant wds 1
AP(config)#