Filter
Top Products
RADIUS Client
7-45
RADIUS Client
Remote Authentication Dial-in User Service (RADIUS) is a logon
authentication protocol that uses software running on a central
server to control access for RADIUS-aware devices to the
network. An authentication server contains a database of
credentials, such as users names and passwords, for each
wireless client that requires access to the access point.
radius-server address
This command specifies the primary and secondary RADIUS
servers.
Syntax
radius-server address [secondary] <host_ip_address |
host_name>
• secondary - Secondary server.
• host_ip_address - IP address of server.
• host_name - Host name of server. (Range: 1-20 characters)
Default Setting
None
Command Function Mode Page
radius-server
address
Specifies the RADIUS server GC 7-45
radius-server port Sets the RADIUS server network
port
GC 7-46
radius-server key Sets the RADIUS encryption key GC 7-47
radius-server
retransmit
Sets the number of retries GC 7-47
radius-server
timeout
Sets the interval between sending
authentication requests
GC 7-48
show radius Shows the current RADIUS settings Exec 7-48